The Driveway Alert Receiver Key Features:
SolarBeam™ 6 Zone Driveway Alert Receiver
The SolarBeam Driveway Alert Receiver can be used with up to 6 Solarbeam pairs, so you can easily cover the main entrance as well as the entrance to the barn and the back lane. There is a separate LED on the receiver for each zone (i.e Solarbeam) so you know where your visitors are. If you require more than 6 Solarbeams then multiple receivers may be used.
The receiver is simple to install. Place it in a suitable location in the house, where it has a clear radio signal from each of the Solarbeams, and connect the power supply.
If you require something louder than the built in buzzer, then the relay contacts may be used to activate an additional buzzer or lights. This dry contact output can also be intergrated into any existing wired alarm system.
Up to 6 wireless sensors can be registered. One dry contact output Buzzer and light are activated for 3 seconds Alarm output: NC dry contact; 1A, 120V AC; 2A, 24V DC LEDs indicate the active zone Relay contact output time: 3 sec Power input: 12V DC Power consumption: stand-by current < 8mA alarm current < 30mA RF frequency: 433MHz RF receiver sensitivity: -105dBm Size: 100mm x 68mm x 35mm Operating temperature: -25 deg C to 55 deg C
We are able to offer security advice and guidance.
Our license number is 756888