The Driveway Alert Receiver Key Features:
SolarBeam™ 6 Zone Driveway Alert Receiver
The SolarBeam Driveway Alert Receiver can be used with up to 6 Solarbeam pairs, so you can easily cover the main entrance as well as the entrance to the barn and the back lane. There is a separate LED on the receiver for each zone so you know which set of Solarbeam pairs have been activated. If you require more than 6 pairs of Solarbeams then multiple receivers may be used.
The receiver is simple to install. Place it in a suitable location in the house, where it has a clear radio signal from each of the Solarbeams, and connect the power supply.
If you require something louder than the built in buzzer, then the 12v DC output may be used to power an additional buzzer or lights. This can also be intergrated into any existing wired alarm system. (providing you use an interface relay)
Up to 6 wireless sensors can be registered. One 12V DC output (200mA max)Buzzer and light are activated for 5 seconds LEDs indicate the active zone Power input: 12V DC Power consumption: stand-by current < 8mA alarm current < 30mA RF frequency: 433MHz RF receiver sensitivity: -105dBm Size: 100mm x 68mm x 35mm Operating temperature: -25 deg C to 55 deg C
We are able to offer security advice and guidance.
Our license number is 756888